Single Eye: LS1 Range

Single Eye – Single Weave – Light Duty Support Grip

Light Duty Support Grip

These grips offer a single closed eye with a single weave galvanised wire construction for secure fixing of suspended cables.These grips are used whenever a cable or other cylindrical object needs to be supported.

CGM produces a range of standard support grips in a range from 4mm to 102mm in diameter. CGM grips vary in pulling strengths through differing types to suit every application.

When pulling light loads, CGM recommends that a single weave (light duty) grip be used. For heavier, more challenging loads, double or triple weave models (general and heavy duty) are ideal.

Range mmArt.NoTypeWeave LengthEye LengthM.B.SWeight ea Kg
4 - 6108 350LS1/490100135 kg0.01
6 - 8108 351LS1/690130207 kg0.01
8 - 10108 352LS1/8130130346 kg0.01
10 - 13108 353LS1/10130140346 kg0.02
13 - 16108 354LS1/13180180346 kg0.02
16 - 20108 355LS1/16245180681 kg0.04
20 - 25108 356LS1/20260180814 kg0.10
25 - 30108 357LS1/253302201173 kg0.15
30 - 38108 358LS1/303302401173 kg0.18
38 - 45108 359LS1/383702801173 kg0.20
44 - 52108 360LS1/443703601564 kg0.25
50 - 65108 361LS1/504903602195 kg0.46
64 - 77108 362LS1/644903602195 kg0.46
76 - 90108 363LS1/764904505490 kg0.50
89 - 102108 364LS1/895104505490 kg0.60

Substantial safety ratios have been applied to all quoted minimum-breaking strengths.
Additional safety factors, determined by application, should be applied.
CGM recommends a minimum safety factor of 3/1 for horizontal pulls and 5/1 for overhead pulling.
Due to metal fatigue, any M.B.S printed will decrease in value after usage.

M.B.S will decrease by approximately 10% where grips are made in Stainless Steel.