Bespoke Range: DP Range

Due to the double ferrule, the wire used and the method of weaving the DP range of grips are our strongest grips They are available in ranges from 5mm-19mm up to 35mm-48mm.

Substantial safety ratios have been applied to all quoted minimum-breaking strengths.
Additional safety factors, determined by application, should be applied.
CGM recommends a minimum safety factor of 3/1 for horizontal pulls and 5/1 for overhead pulling.
Due to metal fatigue, any M.B.S printed will decrease in value after usage.

M.B.S will decrease by approximately 10% where grips are made in Stainless Steel.