Cable Grips Ltd Cabling specialists Minehead
Our Range of Products: Double Eye
Double Eye
A full range of double eye grip are manufactured to cover pulling or supporting operations where there are two anchor points available.
Double Eye Split (Lace Up)
Add CGM manufacture a complete range of split( lace up) grips Laces are supplied with grips.
Double Eye: LS2 Range
Double Eye – Single Weave – Light Duty Support Grip
These grips offer a double eye with a single weave galvanised wire construction for secure fixing of suspended cables. These grips are used whenever a cable or other cylindrical object needs to be supported.
CGM produces a range of standard support grips in a range from 4mm to 102mm in diameter. CGM grips vary in pulling strengths through differing types to suit every application.
When pulling light loads, CGM recommends that a single weave (light duty) grip be used. For heavier, more challenging loads, double or triple weave models (general and heavy duty) are ideal.
| Range mm | Art.No | Type | Weave Length | Eye Length | M.B.S | Weight ea Kg |
|---|---|---|---|---|---|---|
| 10 - 13 | 108 370 | LS2/10 | 130 | 100 | 346 kg | 0.02 |
| 13 - 17 | 108 371 | LS2/13 | 180 | 130 | 346 kg | 0.02 |
| 16 - 21 | 108 372 | LS2/16 | 245 | 130 | 681 kg | 0.04 |
| 20 - 25 | 108 373 | LS2/20 | 260 | 135 | 814 kg | 0.10 |
| 25 - 30 | 108 374 | LS2/25 | 330 | 160 | 1173 kg | 0.15 |
| 30 - 38 | 108 375 | LS2/30 | 330 | 180 | 1173 kg | 0.18 |
| 38 - 45 | 108 376 | LS2/38 | 370 | 180 | 1173 kg | 0.20 |
| 44 - 52 | 108 377 | LS2/44 | 370 | 180 | 1564 kg | 0.25 |
| 50 - 65 | 108 378 | LS2/50 | 490 | 220 | 2195 kg | 0.46 |
| 64 - 77 | 108 379 | LS2/64 | 490 | 220 | 2195 kg | 0.46 |
| 76 - 90 | 108 380 | LS2/76 | 490 | 220 | 5490 kg | 0.50 |
| 89 - 102 | 108 381 | LS2/89 | 510 | 220 | 5490 kg | 0.60 |
Substantial safety ratios have been applied to all quoted minimum-breaking strengths.
Additional safety factors, determined by application, should be applied.
CGM recommends a minimum safety factor of 3/1 for horizontal pulls and 5/1 for overhead pulling.
Due to metal fatigue, any M.B.S printed will decrease in value after usage.
M.B.S will decrease by approximately 10% where grips are made in Stainless Steel.