Offset Eye: LS3 Range

Offset Eye – Single Weave – Light Duty Support Grip

Light Duty Support Grip

These grips offer a single offset eye with a single weave galvanised wire construction for secure fixing of suspended cables. These grips are used whenever a cable or other cylindrical object needs to be supported.

CGM produces a range of standard support grips in a range from 4mm to 102mm in diameter. CGM grips vary in pulling strengths through differing types to suit every application.

When pulling light loads, CGM recommends that a single weave (light duty) grip be used. For heavier, more challenging loads, double or triple weave models (general and heavy duty) are ideal.

Range mmArt.NoTypeWeave LengthEye LengthM.B.SWeight ea Kg
10 - 13108 390LS3/1013080346 kg0.02
13 - 17108 391LS3/13180100346 kg0.02
16 - 21108 392LS3/16245100681 kg0.04
20 - 25108 393LS3/20260130814 kg0.10
25 - 30108 394LS3/253301301173 kg0.15
30 - 38108 395LS3/303301301173 kg0.18
38 - 45108 396LS3/383701401173 kg0.20
44 - 52108 397LS3/443701601564 kg0.25
50 - 65108 398LS3/504901602195 kg0.46
64 - 77108 399LS3/644901702195 kg0.46
76 - 90108 400LS3/764902005490 kg0.50
89 - 102108 401LS3/895102005490 kg0.60

Substantial safety ratios have been applied to all quoted minimum-breaking strengths.
Additional safety factors, determined by application, should be applied.
CGM recommends a minimum safety factor of 3/1 for horizontal pulls and 5/1 for overhead pulling.
Due to metal fatigue, any M.B.S printed will decrease in value after usage.

M.B.S will decrease by approximately 10% where grips are made in Stainless Steel.