Cable Grips Ltd Cabling specialists Minehead
Our Range of Products: Double Eye
Double Eye
A full range of double eye grip are manufactured to cover pulling or supporting operations where there are two anchor points available.
Double Eye Split (Lace Up)
Add CGM manufacture a complete range of split( lace up) grips Laces are supplied with grips.
Double Eye Lace Up: LSL2 Range
Double Eye Lace Up – Single Weave – Light Duty Support Grip
These grips offer a double eye with a single weave galvanised wire construction for secure fixing of suspended cables. These grips are used whenever a cable or other cylindrical object needs to be supported.
CGM produces a range of standard support grips in a range from 4mm to 102mm in diameter. CGM grips vary in pulling strengths through differing types to suit every application.
When pulling light loads, CGM recommends that a single weave (light duty) grip be used. For heavier, more challenging loads, double or triple weave models (general and heavy duty) are ideal.
| Range mm | Art.No | Type | Weave Length | Eye Length | M.B.S | Weight ea Kg |
|---|---|---|---|---|---|---|
| 10 - 17 | 108 510 | LSL2/10 | 130 | 100 | 346 kg | 0.02 |
| 13 - 17 | 108 531 | LSL2/13 | 180 | 130 | 346 kg | 0.02 |
| 16 - 20 | 108 511 | LSL2/16 | 245 | 130 | 681 kg | 0.02 |
| 20 - 25 | 108 512 | LSL2/20 | 260 | 135 | 814 kg | 0.04 |
| 25 - 32 | 108 513 | LSL2/25 | 330 | 160 | 1173 kg | 0.09 |
| 30 - 38 | 108 514 | LSL2/30 | 330 | 180 | 1173 kg | 0.18 |
| 38 - 51 | 108 515 | LSL2/38 | 370 | 180 | 1173 kg | 0.20 |
| 50 - 64 | 108 516 | LSL2/50 | 490 | 220 | 2195 kg | 0.24 |
| 64 - 77 | 108 517 | LSL2/64 | 490 | 220 | 2195 kg | 0.40 |
| 76 - 90 | 108 518 | LSL2/76 | 490 | 220 | 5490 kg | 0.50 |
| 89 – 102 | 108 519 | LSL2/89 | 510 | 220 | 5490 kg | 0.60 |
Substantial safety ratios have been applied to all quoted minimum-breaking strengths.
Additional safety factors, determined by application, should be applied.
CGM recommends a minimum safety factor of 3/1 for horizontal pulls and 5/1 for overhead pulling.
Due to metal fatigue, any M.B.S printed will decrease in value after usage.
M.B.S will decrease by approximately 10% where grips are made in Stainless Steel.